School crossing patrol stop sign
Features
- Conforms to proposed and current legislation
- New stronger, lighter design
- Available in two types of reflectivity RA1 and Prismatic
- Optional new design two piece pole for ease of storage
- Protective edging strip
- Rubber handle to avoid slipping
- Aluminium composite face surface
- Option of fibreglass one piece pole or Two piece pole aluminium with steel / zinc coated connector with centre cord just to keep pieces together
- Reflectivity available in either RA1 or prismatic grade reflective film
- Overall height 1960mm
- Two piece pole 1090mm folded height
- Signface diameter 460mm
- One piece pole 1.25kg
- Two piece pole 1.50kg
£xx.xx
When choosing a School Crossing Patrol sign, there are 2 options you need to consider.
- Do you require a 1 piece or 2 piece pole?
- RA1 (Low grade) or Prismatic (highest grade you can get) grade of reflectivity?
What you need to know about the law and School Crossing Patrol Signs
Click here for further information...
Size, colour and type of patrol sign
(1) A patrol sign shall comprise a roundel and a pole on which the roundel is mounted
(2) The roundel shall be not less than 450 nor more than 470 millimetres in diameter and each of its faces shall be of the colour and type shown in the Schedule to these Regulations.
(3) A protective strip, in these Regulations called a “perimeter strip”, may be applied to the perimeter of the roundel in accordance with the requirements of paragraph
(4) The requirements are that—
- (a) the perimeter strip shall not be retroreflecting;
- (b) the perimeter strip shall be either coloured red or uncoloured and transparent;
- (c) the part of the red border of the roundel not covered by the perimeter strip shall be at least 40 millimetres wide;
- (d) the overall width of the red border together with the perimeter strip shall not exceed 50 millimetres; and
- (e) the diameter of the part of the roundel coloured black and yellow shall not be less than 360 millimetres.
(5) If a patrol sign was first used before the coming into force of these Regulations with a perimeter strip applied to the roundel, that strip may be retained even if it does not comply with the requirements of paragraph
(7) The pole shall be coloured with alternating black and yellow bands of equal size and not less than 285 nor more than 315 millimetres deep and with a black band uppermost below the roundel.
Illumination
(1) The yellow bands on the pole may be illuminated by means of retroreflecting material.
(2) The parts of the roundel coloured black shall not be illuminated by means of retroreflecting material.
(3) Subject to paragraph
(4), the parts of the roundel coloured yellow shall be fluorescent. With the exception of the parts coloured black and any perimeter strip, the roundel shall be illuminated by means of retroreflecting material, but retroreflecting material applied to the parts coloured yellow shall, if that material is not fluorescent, be applied in horizontal strips with gaps between the strips.
(5) The parts of the roundel coloured red may be fluorescent.
Contact Us
Talk to our qualified staff about your corporate and uniform clothing needs.
Sign Up To Our Newsletter
Sign up to our occasional newsletter and be in with a chance to win a crate of Wine!
Brochure Request
Find out more about our full range of corporate and uniform clothing by requesting our brochure.